Never think about filters again.

We swap your commercial HVAC filters on an automatic schedule, text you photo proof, and get out of your hair in a… Breeze!

Serving Kansas City Businesses

Get your free quote

Tell us about your building. We'll get back to you within one business day.

$0Trip fees or labor charges
AutomaticEvery 4–12 weeks
Filters includedWe bring them, every visit
PhotosProof sent after every visit

This is what's sitting on most roofs right now.

Nobody climbs up there, so nobody sees it. Until the unit quits and the repair bill shows up.

A filthy filter being pulled out of a commercial rooftop HVAC unit, with grime coating the inside of the cabinet
A neglected unitThis is what a neglected unit looks like. That filter started out white.
Two commercial HVAC filters packed with gray dust, still installed inside an open rooftop unit
Still running, barelyBoth filters are maxed out, and the unit just keeps pulling air through them.
  1. The filter clogs

    Usually within a few months. Faster in kitchens and high-traffic spaces.

  2. The unit strains

    It runs longer and pulls more power to move less air.

  3. Dirt gets past

    Dust coats the coils and parts the filter was supposed to protect.

  4. You pay for it

    Higher power bills every month, then a repair call or an early replacement.

What a dirty filter actually costs you

5–15%More energy your AC uses when the filter is clogged.
$1 in $7Up to that much of what your AC spends on power, wasted on a clogged filter.
$10,000+To replace a rooftop unit. Dirt and strain shorten its life.

A clean filter on a schedule is the cheapest way to prevent it. That's the whole job.

See what yours would cost

Energy figures based on the U.S. Department of Energy estimate that replacing a dirty filter can cut AC energy use 5–15%. Savings vary by building, equipment, and utility rates.

Sound familiar?

If any of these hit close to home, we should talk.

  • You have rooftop units and couldn't say when the filters were last changed.
  • Your HVAC company only comes out a couple of times a year.
  • Your building has a kitchen or sees a lot of foot traffic.
  • You've got more than one location and nobody's keeping track.
  • You'd rather your staff work than climb a ladder.
  • You've paid for a repair that started with "When did you last change your filters?"

If your building has commercial HVAC units, we can service it.

How it works

Set it up once. After that, it just happens.

Step one

We assess your building and quote it.

A quick scan of your building: how many units, what filter sizes, where they sit. You get one flat price per visit before anything else happens.

Step two

We put you on the route.

Every 4 to 12 weeks, depending on your building. Kitchens and high-traffic spaces tend to need it more often. It's automatic from here. No calls, no reminders, no chasing anyone.

Step three

We swap, send proof, and go.

Fresh filters in, the date written on each one, before-and-after photos texted to you. No walkaround, no sales pitch. Then we’re back next time, right on schedule.

Why owners switch to Breeze

Someone has to do it. Here's how the options actually stack up.

BreezeFilter swap routeHVAC companyService callDoing it yourselfYou or your staff
Money
What you payOne quoted rate per visit. Filters included.A trip fee every visit, plus labor, plus marked-up filters.Retail filters, plus paying someone to stop working and go do it.
Surprise costsNone. No trip fees, no labor charges, no upsells.Repair estimates that show up after the swap.Wrong sizes, return trips, and the cost of forgetting.
Time
Your timeNone. We handle all of it, start to finish.Calling, scheduling, and waiting around to let the tech in.Store runs, roof climbs, and swaps, every single time.
SchedulingAutomatic. You're on our route.You call, then wait days or weeks for a slot.Whenever someone remembers.
Hassle
What you need to knowNothing. We track every size, count, and date.When it's time to call them.Every filter size, rating, and airflow direction, for every unit.
Getting on the roofOur crew, not yours.Their tech.An employee on a ladder or the roof.
Who has to rememberWe do. It's on the schedule.You do.You do.
More units or locationsSame zero effort. We just add them to the route.Bigger bills and more visits to coordinate.More sizes to track, more ladders to climb.
Results
How often filters get changedEvery 4 to 12 weeks, like clockwork.Usually twice a year, spring and fall.When someone notices or remembers.
After the swapWe leave.The repair walkaround starts.Back to work, behind on everything else.

What does it cost? Pricing depends on your building: how many units, how many filters, and how often.

Get your free quote

HVAC companies make money when something's wrong. We make money keeping things right.

Already have an HVAC maintenance contract? Keep it. We cover the months between their visits, when filters actually clog.

HVAC company pricing and visit schedules vary by provider.

Questions

How much does it cost?

It depends on your building: how many units you have, how many filters they take, and how often they need changing. Filters are included, with no trip fees or labor charges, so it's a lot more affordable than most people expect. And a clean filter on a schedule costs far less over time than the energy it wastes or the repair it could lead to. Request a quote and we'll get back to you within one business day.

Are you an HVAC company?

No, on purpose. We only change filters. We don't repair, install, or sell equipment, so we have no reason to find problems that aren't there. If we notice a bigger issue with a unit, we work with trusted local HVAC partners who can take care of it.

When do you come?

On a set schedule that works around your hours. We stay out of your customers' way and let you know when we're on site.

What filters do you use?

We use quality pleated filters matched to what your units are built to handle, so your system runs the way it's supposed to. That also keeps us flexible to adjust if your units or needs change.

What areas do you serve?

The Kansas City metro. Reach out if you're nearby and not sure. We're adding routes as we grow.

Ready to stop thinking about filters? Let's get you a quote.

Tell us a little about your building. We'll get back to you within one business day with a flat per-visit price.

Rather talk now?(515) 400-4756[email protected]

Get a quote

Never think about filters again.

We swap your commercial HVAC filters on an automatic schedule, text you photo proof, and get out of your hair in a… Breeze!

Serving Kansas City Businesses

Get your free quote

Tell us about your building. We'll get back to you within one business day.

$0Trip fees or labor charges
AutomaticEvery 4–12 weeks
Filters includedWe bring them, every visit
PhotosProof sent after every visit

This is what's sitting on most roofs right now.

Nobody climbs up there, so nobody sees it. Until the unit quits and the repair bill shows up.

A filthy filter being pulled out of a commercial rooftop HVAC unit, with grime coating the inside of the cabinet
A neglected unitThis is what a neglected unit looks like. That filter started out white.
Two commercial HVAC filters packed with gray dust, still installed inside an open rooftop unit
Still running, barelyBoth filters are maxed out, and the unit just keeps pulling air through them.
  1. The filter clogs

    Usually within a few months. Faster in kitchens and high-traffic spaces.

  2. The unit strains

    It runs longer and pulls more power to move less air.

  3. Dirt gets past

    Dust coats the coils and parts the filter was supposed to protect.

  4. You pay for it

    Higher power bills every month, then a repair call or an early replacement.

What a dirty filter actually costs you

5–15%More energy your AC uses when the filter is clogged.
$1 in $7Up to that much of what your AC spends on power, wasted on a clogged filter.
$10,000+To replace a rooftop unit. Dirt and strain shorten its life.

A clean filter on a schedule is the cheapest way to prevent it. That's the whole job.

See what yours would cost

Energy figures based on the U.S. Department of Energy estimate that replacing a dirty filter can cut AC energy use 5–15%. Savings vary by building, equipment, and utility rates.

Sound familiar?

If any of these hit close to home, we should talk.

  • You have rooftop units and couldn't say when the filters were last changed.
  • Your HVAC company only comes out a couple of times a year.
  • Your building has a kitchen or sees a lot of foot traffic.
  • You've got more than one location and nobody's keeping track.
  • You'd rather your staff work than climb a ladder.
  • You've paid for a repair that started with "When did you last change your filters?"

If your building has commercial HVAC units, we can service it.

How it works

Set it up once. After that, it just happens.

Step one

We assess your building and quote it.

A quick scan of your building: how many units, what filter sizes, where they sit. You get one flat price per visit before anything else happens.

Step two

We put you on the route.

Every 4 to 12 weeks, depending on your building. Kitchens and high-traffic spaces tend to need it more often. It's automatic from here. No calls, no reminders, no chasing anyone.

Step three

We swap, send proof, and go.

Fresh filters in, the date written on each one, before-and-after photos texted to you. No walkaround, no sales pitch. Then we’re back next time, right on schedule.

Why owners switch to Breeze

Someone has to do it. Here's how the options actually stack up.

BreezeFilter swap routeHVAC companyService callDoing it yourselfYou or your staff
Money
What you payOne quoted rate per visit. Filters included.A trip fee every visit, plus labor, plus marked-up filters.Retail filters, plus paying someone to stop working and go do it.
Surprise costsNone. No trip fees, no labor charges, no upsells.Repair estimates that show up after the swap.Wrong sizes, return trips, and the cost of forgetting.
Time
Your timeNone. We handle all of it, start to finish.Calling, scheduling, and waiting around to let the tech in.Store runs, roof climbs, and swaps, every single time.
SchedulingAutomatic. You're on our route.You call, then wait days or weeks for a slot.Whenever someone remembers.
Hassle
What you need to knowNothing. We track every size, count, and date.When it's time to call them.Every filter size, rating, and airflow direction, for every unit.
Getting on the roofOur crew, not yours.Their tech.An employee on a ladder or the roof.
Who has to rememberWe do. It's on the schedule.You do.You do.
More units or locationsSame zero effort. We just add them to the route.Bigger bills and more visits to coordinate.More sizes to track, more ladders to climb.
Results
How often filters get changedEvery 4 to 12 weeks, like clockwork.Usually twice a year, spring and fall.When someone notices or remembers.
After the swapWe leave.The repair walkaround starts.Back to work, behind on everything else.

What does it cost? Pricing depends on your building: how many units, how many filters, and how often.

Get your free quote

HVAC companies make money when something's wrong. We make money keeping things right.

Already have an HVAC maintenance contract? Keep it. We cover the months between their visits, when filters actually clog.

HVAC company pricing and visit schedules vary by provider.

Questions

How much does it cost?

It depends on your building: how many units you have, how many filters they take, and how often they need changing. Filters are included, with no trip fees or labor charges, so it's a lot more affordable than most people expect. And a clean filter on a schedule costs far less over time than the energy it wastes or the repair it could lead to. Request a quote and we'll get back to you within one business day.

Are you an HVAC company?

No, on purpose. We only change filters. We don't repair, install, or sell equipment, so we have no reason to find problems that aren't there. If we notice a bigger issue with a unit, we work with trusted local HVAC partners who can take care of it.

When do you come?

On a set schedule that works around your hours. We stay out of your customers' way and let you know when we're on site.

What filters do you use?

We use quality pleated filters matched to what your units are built to handle, so your system runs the way it's supposed to. That also keeps us flexible to adjust if your units or needs change.

What areas do you serve?

The Kansas City metro. Reach out if you're nearby and not sure. We're adding routes as we grow.

Ready to stop thinking about filters? Let's get you a quote.

Tell us a little about your building. We'll get back to you within one business day with a flat per-visit price.

Rather talk now?(515) 400-4756[email protected]

Get a quote